Skip to content

971 hits on ””

Particle separator AT 8073

Particle separator with a surface mounted magnet.

Pressure Gauge AT 4257

Pressure gauge R1/4 x 63 mm. Class 2,5.

Pneumatic actuator AT 3840 with positioner

Pneumatic actuator with positioner 4-20mA for control of ball valves, butterfly valves or where 90° rotation is required.

Pressure Gauge AT 4258

Pressure gauge R1/4 x 63 mm. Class 2,5.Back tap.

Electric actuator AT 3910 (45-150 Nm)

Electric actuator for On/Off, positioning or modulating of ball valves, butterfly valves or where a 90° rotation is needed.

Air separator AT 8070BK

Automatic air-/particle separator of steel. Gas-/particle separator and dirt protection.

Pressure Gauge AT 4259

Pressure gauge R3/8 x 100 mm. Class 1,0. For industrial applications use 4259R, acid proof media wetted material that withstands +200°C. Also in dampened performance.

Actuator AT 3830

Pneumatic double acting actuators for on-off and control of ball valves and butterfly or where 90° rotation is required.

Electric actuator AT 3911 (200-800 Nm)

Electric actuator for On/Off, positioning or modulating of ball valves, butterfly valves or where a 90° rotation is needed.

Strainer AT 4029B

Ductile iron strainer with flanges, PN 16. Stainless steel strainer insert with mesh width 0,6 mm. For warm water, hot water, steam, condensate and petrolium products as well as glycol-based cooling systems.

Electric fail safe actuator AT 3930, 3931 (40-500 Nm)

Can be installed on all 90° rotating valves with torque up to 500 Nm. In case of power failure, the actuator closes or opens the valve by the means of a spring kit.

Backflow preventer

Protection module type BA with flanged connection for fluid category 4 according to SS-EN 1717.

Pressure gauge AT 8305A

Manometer with red warning indicator, R3/8 x 100. Class 2,5.

Vacuum pump LPH MAG 75320/75330/75340

Two stage vacuum pump in robust design with magnetic coupling

Pneumatic Actuator AT 3831

Pneumatic single acting actuator for on-off and control of ball valves and butterfly valves or where 90° rotation is required.

Kallvattenmätare

Cold water meter with turbine wheel, type Woltmann for distributions and pumping facilities with an accuracy of R100. Flanged connection with a large flow area and low pressure. Can be mounted both horizontally and vertically. Prepared to be equipped withy communication module type Cyble with pulse, M-Bus or wM-Bus.

Electric acuator AT 3940 (15-70 Nm)

Electric actuator for on/off or control of ball valves, butterfly or where a 90° rotation is required.

Pressure gauge

Manometer with double alarm sockets and red warning indicator. R3/8 x 100. Class 1

Vacuum deaerator AT 8080S

Vacuum deaerator for heating and cooling systems. With a pump and automatics for operation pressure and a control unit for automatic function and gas indication.

Pressure Gauge AT 4253

Pressure gauge R3/8 x 100 mm. Class 2,5

Showing 1-30 of 971 hits

Show 10 hits to