Particle separator with a surface mounted magnet.
Pressure gauge R1/4 x 63 mm. Class 2,5.
Pneumatic actuator with positioner 4-20mA for control of ball valves, butterfly valves or where 90° rotation is required.
Pressure gauge R1/4 x 63 mm. Class 2,5.Back tap.
Electric actuator for On/Off, positioning or modulating of ball valves, butterfly valves or where a 90° rotation is needed.
Automatic air-/particle separator of steel. Gas-/particle separator and dirt protection.
Pneumatic double acting actuators for on-off and control of ball valves and butterfly or where 90° rotation is required.
Pressure gauge R3/8 x 100 mm. Class 1,0. For industrial applications use 4259R, acid proof media wetted material that withstands +200°C. Also in dampened performance.
Electric actuator for On/Off, positioning or modulating of ball valves, butterfly valves or where a 90° rotation is needed.
Ductile iron strainer with flanges, PN 16. Stainless steel strainer insert with mesh width 0,6 mm. For warm water, hot water, steam, condensate and petrolium products as well as glycol-based cooling systems.
Can be installed on all 90° rotating valves with torque up to 500 Nm. In case of power failure, the actuator closes or opens the valve by the means of a spring kit.
Protection module type BA with flanged connection for fluid category 4 according to SS-EN 1717.
Manometer with red warning indicator, R3/8 x 100. Class 2,5.
Two stage vacuum pump in robust design with magnetic coupling
Pneumatic single acting actuator for on-off and control of ball valves and butterfly valves or where 90° rotation is required.
Cold water meter with turbine wheel, type Woltmann for distributions and pumping facilities with an accuracy of R100. Flanged connection with a large flow area and low pressure. Can be mounted both horizontally and vertically. Prepared to be equipped withy communication module type Cyble with pulse, M-Bus or wM-Bus.
Electric actuator for on/off or control of ball valves, butterfly or where a 90° rotation is required.
Manometer with double alarm sockets and red warning indicator. R3/8 x 100. Class 1
Vacuum deaerator for heating and cooling systems. With a pump and automatics for operation pressure and a control unit for automatic function and gas indication.
Pressure gauge R3/8 x 100 mm. Class 2,5
Compact vacuum unit
A one stage vacuum pump in OEM construction
Armatak - Full flow system for internal diversion of rain water from roof surfaces. Stainless acid proof Armatak drain with wedged sealing layer/Armatak drain for cardboard with perforated stainless flange and throttle badges for pressure balancing. Welded pipe system in Pe that is mounted horizontally with Armatak-beam.
Ball valve with full bore in stainless steel/CPTFE with weld ends or threaded and mounting flange for actuators. Suitable for actuators. Three-piece construction for easy service and maintenance.
Automatic air deflector with dirt protection.
Electric actuator for on/off or control of ball valves, butterfly or where a 90° rotation is required.
One stage vacuum pump, close coupled, OEM construction.
Compact heating meter, AT 7500F threaded or flanged connection, complete with paired Pt500 temperature sensor, integrator with LCD display, and ultrasonic thermal meter. Cord operation 230VAC. For measuring of thermal energy in heat or cooling systems with water as heat carrier. Not suitable for glycol mixes or other anti-icing additives. The meter meets the demands according to SS-EN1434.
Strainer in stainless steel with an internal thread, PN 40. Strainer insert made of stainless steel, has a standard mesh width of 1,0 mm. A seperate strainer insert with another mesh size be requested and ordered. For brine cooling systems, acids, saline solutions, solvents, alcohols and petroleum products.
Complete mixing vessel with filling pump and necessary fittings for mixing and filling of fluids
One stage, Close coupled vacuum pump from Flowserve.
Measurent of cold and warm water with very high measuring accuracy The water meter is a static meter and it measures flow based on thr ultrasonic principle. The meter has no movable parts and therefore retains its accuracy throughout its life span. The readings are registered in the integrated electronic register and can be communicated either by wired M-Bus or by wireless M-Bus (OMS).
A one stage fluid ring vacuum pump in OEM construction. Close coupled pump where the motor is mounted directly on the pump casing to take up as little space as possible when mounted on the system.
High quality tight butterfly valve, SEMI-LUG performance with a fixed vulcanized rubber lining in the body. Also suitable for vacuum and as a end valve with lever, worm gear or actuators. With a long neck for insulation.
Controllable check valve type EA for fluid category 1-2 according to SS-EN 1717.
Globe valve made of nodular iron, with flanges, PN25. With bellows that prevents the media from coming in contact with the stuffing box. Maintenance-free, external spindle thread, display device that indicates open/closed mode, non-rising steering wheel.
A shut-off valve for steam, condensate, hot water, thermal oil and media that is hazardous for health and Environment.
Ball valve with reduced bore in stainless steel/CPTFE with weld ends or threaded and mounting flange for actuators. Suitable for actuators. Three-piece construction for easy service and maintenance.
Safety valve with standard characteristics. Flanged connections. Grey iron, steel or stainless steel. Soft- or metallic seated disc. DN15-150 (Stainless steel 15-100), PN16-40
Pneumatic single acting actuator for on-off and control of ball valves, butterfly valves or where 90° rotation is required.
A one stage liquid ring vacuum pump in OEM construction. Close coupled pump where the motor is mounted directly on the pump casing to take up as little space as possible when mounted on the system.
One stage vacuum pump Close coupled, OEM construction.
Showing 1-60 of 1468 hits
Show 10 hits to