Vacuum pump LEM/LEL G 91/126/161

A one stage liquid ring vacuum pump in OEM construction. Close coupled pump where the motor is mounted directly on the pump casing to take up as little space as possible when mounted on the system.

Capacity	24 m³/h to 195 m³/h
Pressure range	33 mbar to 1013 mbar
Material	Cast iron & Stainless steel

Variations
Product information

Variations

Article number	Amount
AT 6300-91G
AT 6300-126G
AT 6300-161G

Product information

Main facts

Capacity	Pressure range	Material
24-78 m³/h	33-1013 mbar	Cast iron & Stainless steel

Description

A one stage liquid ring vacuum pump in OEM construction.

Close coupled pump where the motor is mounted directly on the pump casing

to take up as little space as possible when mounted on the system

Range of application

Evacuation and pumping of dry gases and saturated steam.

Typical industries are chemistry, pharmaceutical, food, plastic and rubber industry.

Vacuum is used for distillation, drying, degassing, filling and boiling.

Design

The pump works according to the liquid ring principle. Fluid pumps are in some regards related with displacement pumps since the pump wheel is eccentrically located in the round pump body. When the wheel is rotating a fluid ring is created along the pump body's inner wall. In the cells (the space between the pump body's wings) inside the fluid ring rising part volumes (intake) and then decreasing volumes (outlet) will be created under one rotation.

Material combinations

Pos	0K	4B
Vacuum casing	0.6025 Cast iron	1.4408 Acid-proof steel
Cover	1.4301 Stainless steel	1.4404 Acid-proof steel
Guide disc	1.4301 Stainless steel	1.4404 Acid-proof steel
Shaft	1.4571 Acid-proof steel	1.4571 Acid-proof steel
Valve plate	PTFE	PTFE
Impeller	1.4308 Stainless steel	1.4408 Acid-proof steel