Protection module type BA with threaded connection for fluid category 4 according to SS-EN 1717. Integrated strainer, compact construction
| Dimension range | G 1/2 - G 2 |
|---|---|
| PN | 10 |
| Temperature range | 0ºC to 65ºC |
| Material | Brass / Stainless steel |
| Dimension range | PN | Temperature range | Material |
|---|---|---|---|
G 1/2 - G 2 | 10 | 0ºC to 65ºC | Red brass / Brass |
| G 1/2 - G 2 | 10 | 0ºC to 65ºC | Stainless steel |
| AT 1168B | AT 1168R | ||
|---|---|---|---|
| 1 | Housing | Red brass | Stainless steel |
| 2 | Check valve | Synthetic, red brass | Synthetic stainless steel |
| 3 | Checkvalve | Synthetic, red brass | Synthetic, stainless steel |
| 4 | Control valves | Brass | Stainless steel |
| 5 | Membrane, sealings | NBR, EPDM | NBR, EPDM |
| * = Red brass for preventers marked BA 295, brass for preventers marked 295S |
| AT 1168R | A | B | C | Connection | Weight | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Connection | draining | preventor | |||||||||
| G 1/2 (DN 15) | 225 | 137 | 99 | 50 | 1,80 | ||||||
| G 3/4 (DN 20) | 225 | 137 | 99 | 50 | 1,80 | ||||||
| G 1 (DN 25) | 225 | 137 | 99 | 50 | 1,80 | ||||||
| G 1 1/4 (DN 32) | 327 | 172 | 153 | 70 | 5,70 | ||||||
| G 1 1/2 (DN 40) | 348 | 172 | 153 | 70 | 5,80 | ||||||
| G 2 (DN 50) | 348 | 172 | 153 | 70 | 5,90 | ||||||
| Measurements in mm, weight in kg | |||||||||||
Backflow preventer type BA covers the risks up to fluid category 4 by connection of tap water. I.E. "Fluid that entails a health risk through presence of one or multiple toxic or very toxic substances or several radioactive, mutagenic or cancerous substances".
The preventer has double check valves and an intermediate chamber with draining (the draining valve is combined in an insert with the inlet check valve). The preventer works with three different pressure zones. The pressure in zone 1 is higher than in zone 2, which is higher than zone 3. A drain valve is connected in zone 2 and is opened when the pressure difference between zone 1 and zone 2 falls below 0,14 bar. The water in zone 2 is drained to the atmosphere. That way siphon and pressure overload back flow in the system is prevented.
The backflow preventer should be installed as a complete protection module The protection module contains a preventer type BA together with an integrated dirt filter. Shut-off valves for inlet and outlet included. It's an absolute demand that the backflow preventer is installed as a protection module.
Insufficient or incorrect maintenance of a tap water installation, including backflow preventer, could result in a worse tap water quality. Regular (yearly) maintenance of the protection module should therefore be done to secure the preventer's long term function. This is a demand according to the standard SS-EN 1717. The yearly control should be performed by a controller with the proper education who is approved by Armatec AB.
For all installed backflow preventer of the type BA yearly control routines be established and a control report should be sent to the water supplier.
Armatec's service technicians are specially trained and certified for reparation and service control of backflow preventer. We offer to perform the service control and make sure that the basis for necessary reports is done.
Insufficient or incorrect maintenance of a tap water installation, including backflow preventer, could result in a worse tap water quality. Regular (yearly) maintenance of the protection module should therefore be done to secure the preventer's long term function. This is a demand according to the standard SS-EN 1717. The yearly control should be performed by a controller with the proper education who is approved by Armatec AB.
For all installed backflow preventer of the type BA yearly control routines be established and a control report should be sent to the water supplier.
Armatec's service technicians are specially trained and certified for reparation and service control of backflow preventer. We offer to perform the service control and make sure that the basis for necessary reports is done.
| Stainless steel | |||
| Size | AT-no | ||
|---|---|---|---|
| G 1/2 (DN 15) | 1168R15 | ||
| G 3/4 (DN 20) | 1168R20 | ||
| G 1 (DN 25) | 1168R25 | ||
| G 1 1/4 (DN 32) | 1168R32 | ||
| G 1 1/2 (DN 40) | 1168R40 | ||
| G 2 (DN 50) | 1168R50 |
